Summer road trips are close. A quick at-home tune-up now means less faff in the carpark and more waves when you pull up to that glassy beachie.
Use this fast DIY checklist to get your quiver surf-ready for Aotearoa’s warmer months. It covers leashes, traction, wax, tie-downs and a simple packing method that protects rails, noses and fins. We finish with a lean surf-trip packing list.
If you are lining up a Gisborne mission, check the surf first on Blitz’s free online surf camera, then shop online NZ-wide or swing by our Gisborne store for advice.

Start with the leash
Your leash is basic safety gear. It keeps you connected to your surfboard after a wipeout so you can retrieve it quickly, avoid losing it in currents and reduce board-runaway risks for others.
Do a two-minute inspection:
-
Cord: look for nicks, stretched sections or creases near the rail saver.
-
Swivels: spin them. Any stiffness, corrosion or cracks means a replacement.
-
Cuff and velcro: make sure the padding is intact and the velcro still grabs hard.

Types of leashes include comp (thinner, less drag for smaller surf), all-round (everyday thickness and strength) and big-wave or heavy-water (thicker cords, beefier hardware). For longboards, a longer leash reduces recoil; for grovellers and fish, a comp or light all-round feels lively. If in doubt, match leash length to board length.
Ready to swap a tired cord for a fresh one, see our range of leashes at Blitz.
Refresh traction for confident footwork
Old tailpads can go slick and lift at the edges. Check:
-
Adhesive bond: any peel or bubbling is a water trap.
-
Texture: if it feels smooth under wet feet, grip is fading.
-
Kick and arch: confirm they still match your stance and board tail.
To replace, clean the deck thoroughly, remove residue, dry fully and follow the pad maker’s instructions for placement and cure time. Fresh traction perks up small-wave boards, soft top setups and longboards alike.
Choose the right summer wax
In surfing, wax is the sticky coating you rub on the deck for grip. It stops your feet sliding when you pop up, trim or step back on the tail. Most surfers use a basecoat to create hard bumps, then add a temperature-suited topcoat for tack.
The three common wax types are:
-
Basecoat: hard, forms durable bumps that hold topcoat longer.
-
Temperature-specific topcoats: cold, cool, warm, tropical. Pick for local water temps.
-
Organic or eco lines: similar performance with alternative ingredients.
For early summer in New Zealand, warm formulas usually suit the East Coast, but always check your local water temp. Scrape heavy build-up, lay a neat base, then apply light topcoat layers. A wax comb roughs up tired patches mid-trip and helps scrape clean before a re-wax. Toss a spare bar and comb in your kit, and if you like tried-and-true sticks, browse wax options including favourites like Mr Zogs at Blitz.
Roof racks, tie-downs and a simple boardbag method
For roof transport, start with proper racks and good tie-downs. Cinch straps are fast and secure when used correctly. Run straps over the boards, under both rack bars and back up, then snug them down. Twist the webbing once to reduce hum, keep tails forward if possible, and double-check tension at the first servo. On long drives, re-check often.
Choose a boardbag or day cover that matches your plan. Day covers are lighter and great for daily missions. Padded travel bags add foam for bumpy roads and more boards. Sizing tips:
-
Length: at least equal to board length, a touch longer is fine for easier zip clearance.
-
Width and rocker: fishy outlines and chunkier rails need more room.
-
Extras: fin slots, internal tie-downs, separated compartments and drainage are handy.
When packing, remove fins if you can. Protect the nose and tail with soft clothing, then run a strip of pipe insulation or a towel along each rail. Keep the heaviest board on the bottom and stop hard items from pressing into the deck. If leaving fins in, slip foam or cardboard around the bases so they cannot punch through the bag.
Explore board-carry options in our surfboard bag collection if your current cover has seen better days.
Quick fixes: dings and minor repairs
A surfboard repair kit typically includes sandpaper, resin and hardener matched to construction (epoxy for EPS boards, polyester for PU boards), mixing sticks, a small squeegee and fibre cloth or filler, plus clear instructions. For small cracks and pinholes, clean, dry and follow the manufacturer’s steps. For major creases, crushed rails or anything structural, get a professional repair. Do not surf a leaking ding, as water uptake can spread damage.
Roadie add-ons for beach days
Sunny sessions are brutal without cover. Throw in zinc sunscreen for long-wearing protection on noses, lips and cheeks, and a hooded towel for fast changes and warmth when the wind swings onshore.
What to pack for a surf trip
Keep it simple and reliable:
-
Boards that suit the forecast, plus fins and key
-
Fresh leash, spare leash string and fin screws
-
Tailpad in good nick, deck waxed for summer temps, spare bar and comb
-
Boardbag or day cover, soft padding for rails and noses
-
Roof racks and quality tie-downs, plus a short strap for tail lift
-
Wetsuit for the water temp, rash vest, booties if needed
-
Zinc, hat, hooded towel, water bottle and a small first-aid kit
-
Repair kit for small dings, a rag and alcohol wipes for deck cleaning
Safety and care notes
Always follow manufacturer instructions for install and repairs. Check tie-downs whenever you stop on long drives. If the board has a serious crease, delam or snapped fin box, book a pro repair.
FAQ
-
What are leashes used for?
Leashes connect you to the board after falls, helping prevent runaway boards and making retrieval faster and safer.
-
What are the different types of leashes?
Comp for small waves and low drag, all-round for daily surf, heavy-water for power. Longboard leashes run longer to reduce recoil.
-
What does wax mean in surfing?
It is the grippy coating on your deck that gives traction for paddling, pop-ups and turns.
-
What are the three types of wax?
Basecoat for bumps, temperature-specific topcoats (cold to tropical), and eco or alternative blends.
-
What does a wax comb do?
It roughs up smooth wax to restore grip and helps scrape old wax before a fresh coat.
-
What does a surfboard repair kit include?
Sandpaper, resin and hardener for your board type, mixing tools, fibre cloth or filler, and instructions.
-
How do you choose a surfboard bag?
Match length and width to your board and travel. Day covers for short trips, padded travel bags for longer missions and multiple boards. Look for protection at nose, tail and rails.
-
What to pack for a surf trip?
Board and fins, fresh leash, wax and comb, boardbag, tie-downs, wetsuit or rash vest, zinc, hooded towel, water, snacks and a small repair kit.
Heading for Gisborne
Check the waves on the Gisborne surf cam before you drive. If you need help matching gear to your board and travel plan, our team is happy to share DIY tips and recommendations in-store or online.
Wrap-up
Tune your leash, freshen traction, match your wax to summer water temps and sort transport with the right bag and tie-downs. Pack light but smart, add zinc and a hooded towel, and you will be set for those early roadies. If you want a hand choosing leashes, wax or a surfboard bag, the Blitz crew can help, online across NZ or at our Gisborne store.


